Skip to content
Established in 2008Cairo, Egypt
Flags of Arab countries
الاتحاد العربي لتنمية الموارد البشريةArab Union for Human Resources DevelopmentVisitor Register
Programme information

Programme reference: UHRDA-202640044

The programme focuses on reliability, predictive maintenance, and failure analysis and maintenance planning, work orders, and execution measurement.

Programme information reviewed:

Programme source and review scope

This reference links the page to the Union’s 2026 plan. Source table: 40 · row: 44.

The date above covers review of the programme information, source traceability and presentation of published information. It does not imply independent academic accreditation.

Past date — archived

Information to help you decide

Dates
2026-07-26 - 2026-07-30
Location
Cairo — Arab Union for Human Resources Development headquarters
Programme fee
600 US dollars
Programme duration
One week
Delivery language
Arabic — English delivery is available by agreement
Attendance mode
In person
Training hours
25 training hours

This date has passed. Your request concerns a new date and does not reserve a place on the expired date. The administration will confirm the date and availability.

What the programme fee includes

  • Training
  • Training materials
  • Certificate
  • Breaks between sessions
  • Lunch
  • Airport arrival and departure transfers

The advertised fee is the total amount payable by the participant. No additional fees are added.

Request an invoice or an approved quotation — Include the programme name or number in your request.

Certificate of completion for the programme, workshop or training course

Participants receive a certificate of completion for the programme, workshop or training course from the Arab Union for Human Resources Development. The certificate is awarded on the basis of attendance.

This programme is listed under Maintenance in the Maintenance sector. The published date has passed. This page remains a reference for the programme and its subject.

Programme brochure

Technical Fault Analysis and Technical Equipment Reports

Introduction

The programme “Technical Fault Analysis and Technical Equipment Reports” addresses building maintenance based on asset criticality, condition data, and failure analysis. It connects the subject to workplace practice by identifying challenges, examining existing data and practices, and selecting approaches suited to the organization and available resources.

The content progresses from Reliability, Predictive Maintenance, and Failure Analysis to Performance Measurement and Continuous Improvement, with applications covering Maintenance Planning, Work Orders, and Execution Measurement, Mechanical Equipment Analysis and Fault Diagnosis, and Data Analysis and Decision Support. It concludes with practical outputs helping participants transfer learning to the workplace and review implementation quality and results.

Learning objectives

  1. Analyze asset failure and condition data to define a justified warning and maintenance intervention in an application related to “Technical Fault Analysis and Technical Equipment Reports”.
  2. Build a maintenance plan and work order connecting asset criticality, resources, and documentation.
  3. Interpret mechanical equipment performance and identify fault hypotheses and safe verification steps.
  4. Turn available data into documented analysis that supports a specific professional decision.
  5. Developing performance indicators that distinguish completion of activities from achievement of results.

Learning areas

Learning area 1: Reliability, Predictive Maintenance, and Failure Analysis

  1. Define the asset's function, functional failure, and usage context, and assess the effects of failure modes before selecting a maintenance task type.
  2. Organize fault, downtime, repair, and condition reading histories, checking the quality of timestamps, classifications, and record completeness.
  3. Analyze trends, vibration, temperature, or other appropriate condition indicators, linking alerts to documented thresholds and specialist technical review.
  4. Distinguish correlation and prediction from proof of a failure's cause, and assess false and missed alarms and warning lead time before intervention.
  5. Design a condition monitoring pilot for a training asset, with escalation criteria and documentation of the maintenance decision, and verify the intervention's effect on reliability. The application examines a case specifically related to “Technical Fault Analysis and Technical Equipment Reports”.

Learning area 2: Maintenance Planning, Work Orders, and Execution Measurement

  1. Inventory assets and build a hierarchy, coding system, technical data, and maintenance history, classifying criticality by safety, service, and cost.
  2. Select a mix of preventive, condition-based, and corrective maintenance, connecting the decision to failure modes, data, and manufacturer instructions.
  3. Plan the work order's scope, resources, materials, time, isolation, and permits, and define readiness conditions before scheduling.
  4. Organize schedules, shutdowns, and equipment handovers between operations and maintenance, recording actual work, causes, parts, and time.
  5. Analyze backlog, recurrence, plan compliance, and reliability, and propose documented adjustments to maintenance tasks and their frequency.

Learning area 3: Mechanical Equipment Analysis and Fault Diagnosis

  1. Read training equipment data and diagrams, identifying function, operating conditions, design limits, and key measurement points.
  2. Analyze relationships between load, flow, pressure, temperature, and vibration, and review measurement quality before interpreting performance deviations.
  3. Identify failure modes involving components, seals, bearings, alignment, and lubrication, and connect fault symptoms to multiple testable hypotheses.
  4. Select inspections and diagnostic methods suited to the condition and criticality, and refer to manufacturer instructions and isolation and permit procedures before any intervention.
  5. Prepare a diagnostic report showing readings, evidence, possibilities, the next verification step, and the limits of conclusions from the available data.

Learning area 4: Data Analysis and Decision Support

  1. Frame an analytical question linked to a specific decision, and define the unit of measurement, time period, and data needed to answer it.
  2. Check data quality for completeness, accuracy, consistency, and duplication, and document cleaning steps and limitations on reliance.
  3. Select appropriate comparisons, indicators, and charts, and distinguish statistical correlation from causal explanations of results.
  4. Interpret results in the work context, test assumptions and unusual values, and present alternatives and their associated uncertainty.
  5. Prepare an analytical report containing the finding, recommendation, data source and date, review owner, and next follow-up step.

Learning area 5: Performance Measurement and Continuous Improvement

  1. Define the intended result and its beneficiary, and distinguish indicators of inputs, activities, outputs, and impact.
  2. Define each indicator's formula, unit of measurement, data source, update frequency, and responsibility for collecting and verifying it.
  3. Select a baseline, a realistic target, and alert thresholds, and review data quality before interpreting a deviation from the target.
  4. Analyze the causes of the performance gap and connect them to corrective actions with a specified owner, deadline, resources, and method for verifying closure.
  5. Design a review meeting that presents trends, decisions, and open actions, and monitor improvement across more than one measurement cycle.

Outputs

  1. A failure mode analysis, condition monitoring plan, and alert and review rules.
  2. A maintenance plan, work schedule, work order card, and monitoring indicators.
  3. An equipment profile, fault diagnosis tree, and preliminary inspection plan.
  4. A dashboard and decision memo explaining the data, assumptions, and alternatives.
  5. Performance indicator cards and a plan for reviewing results and improvement actions.

Target participants

  1. Engineers, technicians, supervisors, and operations staff whose work relates to the programme subject.
  2. Managers and teams involved in building maintenance based on asset criticality, condition data, and failure analysis, according to their practical responsibilities.
  3. Professionals responsible for applying the outputs of “Technical Fault Analysis and Technical Equipment Reports” within their organizations.

Participation requirements

  1. Working familiarity with the programme field and the ability to discuss a professional case or challenge.
  2. The suitability of experience and any specialist prerequisites are reviewed with the Union administration before participation is confirmed.

Conclusion

The programme “Technical Fault Analysis and Technical Equipment Reports” combines understanding concepts, reviewing cases, and developing a practical application. Participants leave with steps adaptable to their responsibilities and organizational resources, with an indicator for monitoring application and reviewing results after returning to work.

Participation arrangements and any special requirements are set out in the Union’s participation confirmation.

Request a new dateRequest a new programme dateArab Union for Human Resources Development
Program

Technical Fault Analysis and Technical Equipment Reports

Previous date — for reference only: - July 2026

This date has passed. Your request concerns a new date and does not reserve a place on the expired date. The administration will confirm the date and availability.

7-15 digits; include the country code for international contact.

Applications are directed to the Union’s main email: [email protected]

The Union reviews your request and contacts you to confirm availability, dates and arrangements. Submission is not final confirmation of participation.

How Do We Use Your Data?

Submission is complete when a save confirmation and reference appear. The result explains the email notification status; saving a request or mail-server acceptance does not confirm inbox delivery. Submission does not confirm participation, pricing or a booking before the administration responds. The Union team will contact you to follow up.

Back to Maintenance programmes →