Advanced Preventive Maintenance
Introduction
The programme “Advanced Preventive Maintenance” addresses improving maintenance planning, execution, and equipment reliability in the oil sector. It connects the subject to workplace practice by identifying challenges, examining existing data and practices, and selecting approaches suited to the organization and available resources.
The content progresses from Maintenance Planning, Work Orders, and Execution Measurement to Data Analysis and Decision Support, with applications covering Reliability, Predictive Maintenance, and Failure Analysis, Mechanical Equipment Analysis and Fault Diagnosis, and Process Safety, Barriers, and Management of Change. It concludes with practical outputs helping participants transfer learning to the workplace and review implementation quality and results.
Learning objectives
- Build a maintenance plan and work order connecting asset criticality, resources, and documentation in an application related to “Advanced Preventive Maintenance”.
- Analyze asset failure and condition data to define a justified warning and maintenance intervention.
- Interpret mechanical equipment performance and identify fault hypotheses and safe verification steps.
- Analyze an operational hazard scenario and review barriers and change control responsibilities.
- Turn available data into documented analysis that supports a specific professional decision.
Learning areas
Learning area 1: Maintenance Planning, Work Orders, and Execution Measurement
- Inventory assets and build a hierarchy, coding system, technical data, and maintenance history, classifying criticality by safety, service, and cost.
- Select a mix of preventive, condition-based, and corrective maintenance, connecting the decision to failure modes, data, and manufacturer instructions.
- Plan the work order's scope, resources, materials, time, isolation, and permits, and define readiness conditions before scheduling.
- Organize schedules, shutdowns, and equipment handovers between operations and maintenance, recording actual work, causes, parts, and time.
- Analyze backlog, recurrence, plan compliance, and reliability, and propose documented adjustments to maintenance tasks and their frequency. The application examines a case specifically related to “Advanced Preventive Maintenance”.
Learning area 2: Reliability, Predictive Maintenance, and Failure Analysis
- Define the asset's function, functional failure, and usage context, and assess the effects of failure modes before selecting a maintenance task type.
- Organize fault, downtime, repair, and condition reading histories, checking the quality of timestamps, classifications, and record completeness.
- Analyze trends, vibration, temperature, or other appropriate condition indicators, linking alerts to documented thresholds and specialist technical review.
- Distinguish correlation and prediction from proof of a failure's cause, and assess false and missed alarms and warning lead time before intervention.
- Design a condition monitoring pilot for a training asset, with escalation criteria and documentation of the maintenance decision, and verify the intervention's effect on reliability.
Learning area 3: Mechanical Equipment Analysis and Fault Diagnosis
- Read training equipment data and diagrams, identifying function, operating conditions, design limits, and key measurement points.
- Analyze relationships between load, flow, pressure, temperature, and vibration, and review measurement quality before interpreting performance deviations.
- Identify failure modes involving components, seals, bearings, alignment, and lubrication, and connect fault symptoms to multiple testable hypotheses.
- Select inspections and diagnostic methods suited to the condition and criticality, and refer to manufacturer instructions and isolation and permit procedures before any intervention.
- Prepare a diagnostic report showing readings, evidence, possibilities, the next verification step, and the limits of conclusions from the available data.
Learning area 4: Process Safety, Barriers, and Management of Change
- Identify sources of hazardous materials and energy and process boundaries, distinguishing process safety from individual occupational safety in the case presented.
- Analyze the sequence, causes, and consequences of a hazardous event, and identify preventive and mitigating barriers and evidence for verifying their readiness.
- Review work permits, isolation, and coordination among parties under facility procedures, and identify hold points requiring specialist approval.
- Prepare a change request identifying its rationale, risks, and effects on documents, training, and emergencies, with technical review before implementation.
- Conduct a tabletop exercise involving a hypothetical barrier failure or leak, and document escalation and response actions, lessons, and the subsequent verification plan.
Learning area 5: Data Analysis and Decision Support
- Frame an analytical question linked to a specific decision, and define the unit of measurement, time period, and data needed to answer it.
- Check data quality for completeness, accuracy, consistency, and duplication, and document cleaning steps and limitations on reliance.
- Select appropriate comparisons, indicators, and charts, and distinguish statistical correlation from causal explanations of results.
- Interpret results in the work context, test assumptions and unusual values, and present alternatives and their associated uncertainty.
- Prepare an analytical report containing the finding, recommendation, data source and date, review owner, and next follow-up step.
Outputs
- A maintenance plan, work schedule, work order card, and monitoring indicators.
- A failure mode analysis, condition monitoring plan, and alert and review rules.
- An equipment profile, fault diagnosis tree, and preliminary inspection plan.
- A register of risk scenarios and barriers, and an operational change review plan.
- A dashboard and decision memo explaining the data, assumptions, and alternatives.
Target participants
- Engineers, technicians, supervisors, and operations staff whose work relates to the programme subject.
- Managers and teams involved in improving maintenance planning, execution, and equipment reliability in the oil sector, according to their practical responsibilities.
- Professionals responsible for applying the outputs of “Advanced Preventive Maintenance” within their organizations.
Participation requirements
- Working familiarity with the programme field and the ability to discuss a professional case or challenge.
- The suitability of experience and any specialist prerequisites are reviewed with the Union administration before participation is confirmed.
Conclusion
The programme “Advanced Preventive Maintenance” combines understanding concepts, reviewing cases, and developing a practical application. Participants leave with steps adaptable to their responsibilities and organizational resources, with an indicator for monitoring application and reviewing results after returning to work.
Participation arrangements and any special requirements are set out in the Union’s participation confirmation.
