Gas and Steam Turbine Engineering
Introduction
The programme “Gas and Steam Turbine Engineering” addresses analyzing mechanical equipment performance, diagnosing failures, and developing reliability. It connects the subject to workplace practice by identifying challenges, examining existing data and practices, and selecting approaches suited to the organization and available resources.
The content progresses from Mechanical Equipment Analysis and Fault Diagnosis to Engineering Design, Modeling, and Simulation, with applications covering The Oil and Gas Value Chain and Operations, Maintenance Planning, Work Orders, and Execution Measurement, and Reliability, Predictive Maintenance, and Failure Analysis. It concludes with practical outputs helping participants transfer learning to the workplace and review implementation quality and results.
Learning objectives
- Interpret mechanical equipment performance and identify fault hypotheses and safe verification steps in an application related to “Gas and Steam Turbine Engineering”.
- Analyze an oil and gas value chain process and connect performance to reliability and safety.
- Build a maintenance plan and work order connecting asset criticality, resources, and documentation.
- Analyze asset failure and condition data to define a justified warning and maintenance intervention.
- Build an engineering model and assess its assumptions, limitations, and verification results.
Learning areas
Learning area 1: Mechanical Equipment Analysis and Fault Diagnosis
- Read training equipment data and diagrams, identifying function, operating conditions, design limits, and key measurement points.
- Analyze relationships between load, flow, pressure, temperature, and vibration, and review measurement quality before interpreting performance deviations.
- Identify failure modes involving components, seals, bearings, alignment, and lubrication, and connect fault symptoms to multiple testable hypotheses.
- Select inspections and diagnostic methods suited to the condition and criticality, and refer to manufacturer instructions and isolation and permit procedures before any intervention.
- Prepare a diagnostic report showing readings, evidence, possibilities, the next verification step, and the limits of conclusions from the available data. The application examines a case specifically related to “Gas and Steam Turbine Engineering”.
Learning area 2: The Oil and Gas Value Chain and Operations
- Understand the links between exploration, development, production, processing, and transportation, and define process boundaries, participants, and intended outputs.
- Read a training process diagram, identifying material and energy flows, measurement points, critical equipment, and their relationship to product quality.
- Analyze production, downtime, losses, and resource consumption data, distinguishing measurement problems from process or equipment problems.
- Define coordination requirements among operations, maintenance, safety, and contractors, and document handovers and changes under facility procedures.
- Prepare a process improvement proposal covering hypotheses, controls, resources, and review criteria, using a training case without unauthorized field operations.
Learning area 3: Maintenance Planning, Work Orders, and Execution Measurement
- Inventory assets and build a hierarchy, coding system, technical data, and maintenance history, classifying criticality by safety, service, and cost.
- Select a mix of preventive, condition-based, and corrective maintenance, connecting the decision to failure modes, data, and manufacturer instructions.
- Plan the work order's scope, resources, materials, time, isolation, and permits, and define readiness conditions before scheduling.
- Organize schedules, shutdowns, and equipment handovers between operations and maintenance, recording actual work, causes, parts, and time.
- Analyze backlog, recurrence, plan compliance, and reliability, and propose documented adjustments to maintenance tasks and their frequency.
Learning area 4: Reliability, Predictive Maintenance, and Failure Analysis
- Define the asset's function, functional failure, and usage context, and assess the effects of failure modes before selecting a maintenance task type.
- Organize fault, downtime, repair, and condition reading histories, checking the quality of timestamps, classifications, and record completeness.
- Analyze trends, vibration, temperature, or other appropriate condition indicators, linking alerts to documented thresholds and specialist technical review.
- Distinguish correlation and prediction from proof of a failure's cause, and assess false and missed alarms and warning lead time before intervention.
- Design a condition monitoring pilot for a training asset, with escalation criteria and documentation of the maintenance decision, and verify the intervention's effect on reliability.
Learning area 5: Engineering Design, Modeling, and Simulation
- Translate needs into requirements, design limits, and load or operating cases, documenting criteria and references relevant to the case.
- Prepare an engineering model showing dimensions, materials, relationships, and constraints, and review consistency between drawings, assumptions, and inputs.
- Select a simulation method suited to the problem, define boundary conditions, and examine the sensitivity of results to input quality and model settings.
- Compare outputs with a reference calculation or available test data, distinguishing calculation accuracy from the validity of the model's representation of reality.
- Prepare a design report explaining results, limitations, risks, and required modifications, specifying matters requiring specialist engineering review and approval.
Outputs
- An equipment profile, fault diagnosis tree, and preliminary inspection plan.
- An oil operations process map, requirements matrix, and operating indicators.
- A maintenance plan, work schedule, work order card, and monitoring indicators.
- A failure mode analysis, condition monitoring plan, and alert and review rules.
- Design specifications, a simulation model, and a verification and review report.
Target participants
- Engineers, technicians, supervisors, and operations staff whose work relates to the programme subject.
- Managers and teams involved in analyzing mechanical equipment performance, diagnosing failures, and developing reliability, according to their practical responsibilities.
- Professionals responsible for applying the outputs of “Gas and Steam Turbine Engineering” within their organizations.
Participation requirements
- Working familiarity with the programme field and the ability to discuss a professional case or challenge.
- The suitability of experience and any specialist prerequisites are reviewed with the Union administration before participation is confirmed.
Conclusion
The programme “Gas and Steam Turbine Engineering” combines understanding concepts, reviewing cases, and developing a practical application. Participants leave with steps adaptable to their responsibilities and organizational resources, with an indicator for monitoring application and reviewing results after returning to work.
Participation arrangements and any special requirements are set out in the Union’s participation confirmation.
